equivalent to Sauna Dome, FIR Hyper Thermal Equipment i.e.
IFH-230BH provides close range FIR with temperature control
over the whole body. It’s an ideal and effective modern
hi-tech system generally used at home, beauty salons and weight
It adopts first-class intelligent control technology over
the whole blanket effectively giving an even distribution
of thermal heat over the entire blanket in a short period
Water proof soft material with flexible tensile capabilities
even in various sleeping position. ( UL specification )
First ever innovated FIR home sauna blanket
Easy and convenient to fold, operate and store
German precision temperature and time controller operated
by microcomputer system
Enhanced heating effect due to FIR emitted by high-tech
ACF (Activated Carbon Fibre technology) super conductive
The Heating wire is design to withstand any stretches
Easy clean up, materials do not absorb heat, odours or
Please Keep away from sharp objects that may damage the unit
when handling the set up or close down of the sauna equipment.
Place the IFH-230BH Infrared Sauna
Blanket on a flat surface, such as the bed or floor.
Wrap your body in the blanket. If a
massage or body oil is used, then it is recommended to first
wrap the body in a plastic film or sheet to protect the
Put the power box on a flat surface
such as a table and insert the plug into the main power
Turn the main power switch on at the
back of the power box. The ‘Power’ red indicating
light on the hand-held controller will shine. The device
has not started working yet.
Press the ‘ON/OFF’ key
on the hand-held controller to start setting the temperature
and the timer.
Press ‘Timer + / -’ key
on the hand-held controller to set the working time. For
each press, the time will increase or decrease by 5 minutes.
The default time is 40 minutes.
Press ‘Temperature + / -’
key on the hand-held controller to set the working temperature.
For each press, the temperature will increase or decrease
by 1° Centigrade. Set the temperature to your specific
requirements. The default temperature is 42° C.
Press ‘START’ key on the
hand-held controller. The green indicating light will shine
showing the heating is started.
The hand-held controller can be inserted
into the pocket on top of the blanket.
Close the blanket by zipping up the
bag and sticking the shoulder protectors into place.
When the timer counts down to ‘0’,
the buzzer will sound for three times and the digital timer
will display ‘0’ showing the heating is over.
After using the Infrared Sauna Bag,
pull out the plug from the main power socket.
If at any time you need to stop the
session, just press the ‘START’ key. When the
green indicating light goes off, the system will stop working.
Wipe the sweat from the surface of
the thermal blanket with a wet towel and dry the thermal
blanket by laying it flat on a bed or table for more than
Fold the blanket and store it in a
dry and cool place.